Amplifiers  |  Preamplifiers  |  Speakers   |  Subwoofers  |  Analog  |  Digital  |  Cables & Power Products  |  Other

Plinius Hautonga

Now available for demo!

Choice Audio is proud to carry the Plinius Hautonga. We feel it is one of the finest integrated amplifiers on the market and its performance rivals separate components costing twice as much.

If you are looking to save some space and get away from individual components, then you should consider auditioning the Plinius Hautonga. At 200 watts per channel into 8 ohms, there are not many speakers that this amp cannot drive.  The Hautonga can effortlessly drive your speakers and the bass response will surprise you. If you enjoy bass, put this integrated on your short list.

The preamp section of the Plinius Hautonga is an outstanding build quality. It compares favorably to many preamps in the $5,000 price range, including tube preamps. The phono stage is equally impressive. We have hooked the Plinius Hautonga up to Magico S5’s, Magico S1’s, Martin Logan Ethos, KEF LS-50’s and others. In all cases the Hautonga met the challenge and has never failed to impress.

Choice Audio is proud to be the Plinius dealer for the Minneapolis St. Paul area


Plinius Hautonga Specifications:

200 watts RMS per channel into 8 ohms
280 watts RMS per channel into 4 ohms
Both channels driven from 20Hz to
20kHz at less than 0.2% total harmonic distortion

Frequency Response:
20Hz to 20kHz +/–0.2dB
–3dB at 5Hz and –3dB at 70kHz

Typically <0.05% THD at rated power0.2% THD and IM worst case prior to clipping

Current Output:
40A short duration peak per channel
Fuse protected

Slew Rate: 50V/μs

Hum & Noise:
90dB below rated output 20Hz to 20kHz unweighted

Line inputs to speaker out: 40dB
Phono Input To Pre Out: 66dB on high gain, 60dB on low gain

Input Impedance:
47k ohms all inputs

Rated Pre Out Level:
1.5V RMS into 47k ohms or higher

Pre Out Source Impedance: Typically 1.5k ohms

Pre Out Minimum Recommended Load: 47k ohms

Line Out Level: 190mV at 200 ohms

Power Consumption:
0.4A (92W) Class AB Idle
0.14A (32W) Standby


Dimensions: (H x W x D)
4.75″ x 17.75″ x 15.75″

Weight: 30lbs.

Colors:  Silver and Black